Taurus Bandage Level 2 – Pressurized

Taurus Bandage Level 2 – Pressurized
LEAK REPAIR LEVEL 2
PRESSURIZED

Ultra Kit – Quick Repair Kit for Active Pipe Leaks

– No shutdown required
– Repairs leak in 30 minutes
– Repairs under active leak up to 150 psi (11kg/cm2) pressure – Applicable to pipes up to 18″ (457 mm)
– Withstand pressure up to 500 psi (35 kg/cm2)
– Withstand temperature up to 392°F (200°C)

Bandage Size

Ultra Tape

Product Code
Pipe Diametro Number of Rolls Required / Size os the tape roll
50 psi | 4Kg/cm | 10 layers 150 psi | 11Kg/cm | 15 layers 400 psi | 28Kg/cm | 20 layers
1/2″ 1 / TP212 1 / TP212 1 / TP212
3/4″ 1 / TP212 1 / TP212 1 / TP212
1″ 1 / TP212 1 / TP212 1 / TP212
1.1/4″ 1 / TP212 1 / TP212 1 / TP212
1.1/2″ 1 / TP212 1 / TP212 1 / TP212
2″ 1 / TP212 1 / TP212 1 / TP212
2.1/2″ 1 / TP212 1 / TP212 1 / TP212
3″ 1 / TP212 1 / TP412 1 / TP412
4″ 1 / TP412 1 / TP412 1 / TP412
Pipe Diametro Number of Rolls Required / Size os the tape roll
50 psi | 4Kg/cm | 10 layers 150 psi | 11Kg/cm | 15 layers 400 psi | 28Kg/cm | 20 layers
5″ 1 / TP412 1 / TP412 2 / TP412
6″ 1 / TP412 2 / TP412 3 / TP412
8″ 2 / TP412 3 / TP412 4 / TP412
10″ 3 / TP412 4 / TP412 6 / TP412
12″ 4 / TP412 5 / TP412 8 / TP412
14″ 2 / TP520 3 / TP520 4 / TP520
16″ 3 / TP520 4 / TP520 5 / TP520
18″ 3 / TP520 4 / TP520 5 / TP520
>18″ Consult

Surface Preparation

Stop the pipe flow
Roughen the area to the repaired

Stop the Leak

Knead the Epoxi Stick
Place the Epoxy Stick away from the leak location
Start wrapping the Self Fusing Tape a few distance away from the leak location
Continue to wrap the Self Fusing Tape onto pipe while pushing the Epoxy Stick onto leak location

Reinforce Leak Area

Immerse the Fiberglass tape in the water
Wrap the Fiberglass tape around the repair area as tightly and evenly as possible using the entire roll
Discard the plastic tube at the end of the roll
Wet gloves in water and quickly compress the bubbling resins back into the fiberglass wrap

Download Product Data Sheet PDF


The manufacturer, Taurus Epoxy Inc., makes no express or implied warranties, including warranties of merchantability or fitness for a particular purpose for this product. Under no circumstances shall the manufacturer be liable for incidental, consequential or other damages, breach of warranty, strict liability or any other theory arising from the use of this product. The information and recommendations contained herein are based on the Standard Product and are owned and provided solely for the use of our customers. This information is provided in good faith and is believed to be true and accurate as of the date/version of this document. As the manufacturer has no control over the conditions of use or the application process of the parts using this product, the manufacturer cannot accept responsibility for loss, injury or other damage resulting from the use of the Product or this or any other information provided by the manufacturer. Therefore, no warranties of any kind, express or implied, are made by the manufacturer, Taurus Epoxy Inc., with respect to this, or any, product manufactured by them or any contracted or licensed manufacturer. Taurus Epoxy products do not provide structural integrity or improvements. They are only used to provide protection against corrosion, wear, abrasion and chemical attack on a given substrate and only to the extent provided for in data sheets, data sheets, safety data sheets and any other information provided in writing directly from manufacturers’ technical support.