Logo Pipe Menu

LEAK REPAIR LEVEL 1

UNPRESSURIZED

leakrepairlevel1

Quick Repair Kit for Pipe Leaks

 – Repairs leak in 30 minutes
– Ready-to-use kit
– Applicable to pipes up to 18″ (457 mm) diameter
– Withstand pressure up to 400 psi (28 kg/cm2)
– Withstand temperature up to 200°C (392°F)
– Repairs T-joint, elbow joint, valve thread, valve body

1 Roll of Fiberglas Tape

1 unit of Epoxi Stick Quick Cure

1 pair of latex gloves

Bandage Size
Product Code
Pipe DiametroNumber of Rolls Required / Size os the tape roll
50 psi | 4Kg/cm | 10 layers150 psi | 11Kg/cm | 15 layers400 psi | 28Kg/cm | 20 layers
1/2"1 / T2121 / T2121 / T212
3/4"1 / T2121 / T2121 / T212
1"1 / T2121 / T2121 / T212
1.1/4"1 / T2121 / T2121 / T212
1.1/2"1 / T2121 / T2121 / T212
2"1 / T2121 / T2121 / T212
2.1/2"1 / T2121 / T2121 / T412
3"1 / T4121 / T4121 / T412
4"1 / T4121 / T4121 / T412
Pipe DiametroNumber of Rolls Required / Size os the tape roll
50 psi | 4Kg/cm | 10 layers150 psi | 11Kg/cm | 15 layers400 psi | 28Kg/cm | 20 layers
5"1 / T4121 / T4122 / T412
6"1 / T4122 / T4123 / T412
8"2 / T4123 / T4124 / T412
10"3 / T4124 / T4126 / T412
12"4 / T4125 / T4128 / T412
14"2 / T5203 / T5204 / T520
16"3 / T5204 / T5205 / T520
18"3 / T5204 / T5205 / T520
>18"Consult

Surface Preparation

ill01
Stop the pipe flow
ill02
Roughen the area to the repaired

Stop the Leak

ill03
Knead the Epoxi Stick
ill04
Apply the Epoxi Stick to fill in holes or crack to the damaged or leak area

Reinforce Leak Area

ill05
Immerse the Fiberglass tape in the water
ill06
Wrap the Fiberglass tape around the repair area as tightly and evenly as possible using the entire roll
ill07
Discard the plastic tube at the end of the roll
ill08
Wet gloves in water and quickly compress the bubbling resins back into the fiberglass wrap
ill09
Continue to polish the wrap until all bubbling has stopped. Repair completed with smooth and hard ivory appearance

Download Product Data Sheet PDF

The manufacturer, Taurus Epoxy Inc., makes no express or implied warranties, including warranties of merchantability or fitness for a particular purpose for this product. Under no circumstances shall the manufacturer be liable for incidental, consequential or other damages, breach of warranty, strict liability or any other theory arising from the use of this product. The information and recommendations contained herein are based on the Standard Product and are owned and provided solely for the use of our customers. This information is provided in good faith and is believed to be true and accurate as of the date/version of this document. As the manufacturer has no control over the conditions of use or the application process of the parts using this product, the manufacturer cannot accept responsibility for loss, injury or other damage resulting from the use of the Product or this or any other information provided by the manufacturer. Therefore, no warranties of any kind, express or implied, are made by the manufacturer, Taurus Epoxy Inc., with respect to this, or any, product manufactured by them or any contracted or licensed manufacturer. Taurus Epoxy products do not provide structural integrity or improvements. They are only used to provide protection against corrosion, wear, abrasion and chemical attack on a given substrate and only to the extent provided for in data sheets, data sheets, safety data sheets and any other information provided in writing directly from manufacturers’ technical support.