Taurus Bandage Level 3 – Unpressurized with Steam or Chemicals – Mesh

Taurus Bandage Level 3 – Unpressurized with Steam or Chemicals – Mesh
UNPRESSURIZED WITH STEAM OR CHEMICALS

Repair Kit for Pipes with Steam, Condensate and Chemical Products

– Ready-to-use kit
– Repairs leak in 1 hour
– Withstand pressure up to 400 psi (28 kg/cm²) 
– Withstand temperature up to 230ºC (446ºF)
– Calculated according to ASME PCC2

Kit Size

Item Number Nominal Pipe Diameter
TMK 05. – 1.5 KIT 1/2″ / 3/4 ” / 1″ / 1.25″ / 1.5″
TMK 2-3 kit 2″ / 2.5″ / 3″
TCR 4-5 KIT 4″ / 5″
Item Number Nominal Pipe Diameter
TCR 6 KIT 6″
TCR 8 KIT 8″
TCR 19 KIT 10″
TCR 12 KIT 12″
TCR 14 KIT 14″
TCR 16 KIT 16″
Item Number Nominal Pipe Diameter
TCR 18 KIT 18″
TCR 20 KIT 20″
TCR 22 KIT 22″
TCR 24 KIT 24″
TCR 30 KIT 30″
TCR 36 KIT 36″
Immerse the Fiberglass tape in the water
Wrap the Fiberglass tape around the repair area as tightly and evenly as possible using the entire roll
Discard the plastic tube at the end of the roll
Wet gloves in water and quickly compress the bubbling resins back into the fiberglass wrap
Continue to polish the wrap until all bubbling has stopped. Repair completed with smooth and hard ivory appearance

Download Product Data Sheet PDF


The manufacturer, Taurus Epoxy Inc., makes no express or implied warranties, including warranties of merchantability or fitness for a particular purpose for this product. Under no circumstances shall the manufacturer be liable for incidental, consequential or other damages, breach of warranty, strict liability or any other theory arising from the use of this product. The information and recommendations contained herein are based on the Standard Product and are owned and provided solely for the use of our customers. This information is provided in good faith and is believed to be true and accurate as of the date/version of this document. As the manufacturer has no control over the conditions of use or the application process of the parts using this product, the manufacturer cannot accept responsibility for loss, injury or other damage resulting from the use of the Product or this or any other information provided by the manufacturer. Therefore, no warranties of any kind, express or implied, are made by the manufacturer, Taurus Epoxy Inc., with respect to this, or any, product manufactured by them or any contracted or licensed manufacturer. Taurus Epoxy products do not provide structural integrity or improvements. They are only used to provide protection against corrosion, wear, abrasion and chemical attack on a given substrate and only to the extent provided for in data sheets, data sheets, safety data sheets and any other information provided in writing directly from manufacturers’ technical support.