RA Taurus T59HT & TS2
Lime Conveyour
Brazil
Photographic Report of the Application of Dura-Coat®
Rebuild Fast 151 and Dura-Coat® Metal 400 Technology, on the Cenibra Lime Conveyor Shaft.
Equipment Substrate Material
– Sleeve: Carbon Steel
Operational Condition
– Bleaching Unit
Occurrence
The feed area of the conveyor shows pitting corrosion due
to chemical attack.
Objective
Surface preparation with abrasive blasting SA 2 1/2 and
application of Dura-Coat® Rebuild Fast 151 with a DuraCoat® Metal 400 finish.
Location
Brazil
Details of this case
Sharp edges were smoothed using a metal grinder, and Taurus T59 was applied with a spatula, followed by Taurus TS2. The coating was completed with an estimated thickness of 5mm.
